Decorative Stainless Steel Sheet mirror Etching 4x10 Stainless Steel sheet
Etching is a process of using chemicals to remove some areas of a metal surface, creating a pattern or design. GRAND as the ability to produce etched stainless steel sheet and other metal sheets with precise and long-lasting etched patterns. The patterns are finished by applying an electrochemical technique, which is using a protective film of acid resistance to partially cover the
surface of the metal. The exposed areas are etched by acid to remove a thin layer of metal, the surface becomes dull and matte, and the concealed areas are protected by the film and retain their original condition, the non-etch areas can be finished with some specified colors before or after the etching process. Such a contrast creates a stunning pattern, which can be designed as a specified effect. The etched metal sheet is an ideal material for decoration purposes such as wall cladding, ceilings, furniture,
elevator interiors, and more.
Here are the steps to etch stainless steel sheet:
1. Clean the stainless steel sheet with a degreaser to remove any oils, fingerprints, or dirt that may interfere with the etching process.
2. Cut a piece of adhesive vinyl or use a laser-cut stencil to create your desired design. Peel off the backing and carefully stick the vinyl onto the surface of the stainless steel sheet. Alternatively, you can use a resist to protect the parts of the sheet that you want to remain unetched.
3. Put on your protective gear, including gloves, goggles, and an apron. Etching solution can be dangerous if it comes in contact with your skin or eyes.
4.Apply the etching solution to the exposed areas of the stainless steel sheet. You can use an applicator brush or spray bottle to apply the solution evenly over the surface. Follow the instructions on the etching solution for how long to leave it on the surface before rinsing.
5. Rinse the stainless steel sheet with water to remove the etching solution. Be sure to dispose of the
solution properly according to local regulations.
6. Peel off the vinyl or resist to reveal the etched design on the stainless steel sheet.
7. If desired, you can use a metal polish to clean up any residue left behind by the etching process.
|
|
Etched Titanium Stainless Steel Sheet mirror Etched Stainless Steel sheet decorative 4x10 stainless steel sheet
|
|
|
Stainless steel (201#, 304#, 316#)
|
|
|
1000mm*2000mm/1500mm*3000mm/1220mm*2440mm/
1220mm*3050mm/Customized (As your inquiry)
|
|
|
Titanium gold, rose gold, black titanium,sapphire blue,bronze,green (PVD COLOR COATING CAN BE USED INDOOR ANT OUTDOORS FOR MORE THAN 20 YEARS WITHOUT FADING)
|
|
|
Hairline(brushed),8k mirror, Etching,Embossed,Vibration, No 4 brushed, Sand blasting, PVD coating,etc.
|
|
|
Decorating Hotel, Villa, KTV, Engineering decoration, decorating ceiling
|
|
|
Waterproof + fumigation-free wooden case
|
|
|
15-20 days after confirm orders
|
For 18 years, we never give up our pursuit for metal arts. For us every decoration project means a challenge.
We remain using metal to bring more beauty to decorations, and then let art integrate into our works and space art add warmth to our life.
Home
>
Products
>
Etched Stainless Steel Sheet
>
